Embedded Files
On the day of DARI Sessions:
On the day of DARI Sessions:
1. Turn the system on and test that a skeleton can be acquired successfully
1. Turn the system on and test that a skeleton can be acquired successfully
- If applicable: Power-up the Network using Tools in the top menu bar of Connect to turn on the cameras
- If all cameras are not shown: Use "Bounce Network", close and re-open the Capture Application
- See Connect for more information
- If all cameras are not shown: Use "Bounce Network", close and re-open the Capture Application
- Load a test session to test skeleton acquisition
- If the camera previews say "Check Calibration" capture the background and check the skeleton acquisition. If it is successful, no calibration needs redone.
- See Capture for more information
- If skeleton acquisition is not successful, re-calibrate the system or load in a recently saved calibration. Typically just extrinsic, setting the floor, and recapturing the background need redone
- See Calibration for more information
Opening everything, presenter.mp42. Ensure the subject is prepared in the appropriate attire:
2. Ensure the subject is prepared in the appropriate attire:
What to Wear
What to Wear
- Fitted athletic gear like a T-shirt, shorts or leggings
- Comfortable shoes you can move in
- Solid colors that starkly contrast with the wall and floor color
- Long hair pulled back to where it does not interfere with the shoulders or head height
What not to wear
What not to wear
- Loose, baggy clothes like hoodies, blouses, dresses or skirts
- Colors that are similar to the walls or floor color
- Checkered, gingham, or plaid patterns
- Shoes that are not safe for the movements
- Hair tied in a bun or ponytail on top of the head where the top of the head cannot be distinguished from the hair
3. Prepare the Subject's Session
3. Prepare the Subject's Session
- Create the Subject's Session in Session Manager with their current Height and Weight
- Optional: If using Presenter, Start Presenter
- Click "Start Capture" for the Subject's Session
- Capture the Background with the space clear
- For more information see Connect
Create Session.mp44. Ensure the subject has an expectation of what they will be asked to do:
4. Ensure the subject has an expectation of what they will be asked to do:
- It's easy!
- Have your subjects warm up and stretch first if you would like them to.
- Stand in the capture space without any markers or special clothing. It is a non-invasive experience with only video cameras several feet away.
- You will first have your skeleton acquired by striking a pose and then performing several easy scaling movements directly following. This is creating a 3-D model of you!
- Then will be guided through each movement with a video or instructions and a demonstration
- When you are ready, you will perform the movement to the best of your ability after the DARI user counts you down 1, 2, 3... go!
- You will repeat this process for the list of movements which will only take a few minutes.
- You data will be processed and in less than a minute you will have your results!
5. Perform a Capture Session and repeat for all Subjects
5. Perform a Capture Session and repeat for all Subjects
Create session, Full Session with everything_Trim.mp46. Once completed, close all applications on the system, power-down the network and either power off or lock the computer.
6. Once completed, close all applications on the system, power-down the network and either power off or lock the computer.
1. Close out of Capture
2. Power-down Network
3. Quit out of Connect
4. Log Out or Shut Down the Computer
Closing Out.mp4Report abuse